Stand for a Feelworld FW760 7 inch Field Monitor

// Field monitor stand
// Stand for a Feelworld FW760 7 inch Field Monitor
// Categories: Computer Hardware

// Set units
@settings(defaultLengthUnit = mm)

// Define parameters
plateLength = 121
plateLengthBase = 60

width = 3

plateWidth = 62 + 4
holeRadius = 4 / 2 // 2.84
holeDistanceY = 52.1 + 2 * holeRadius
holeDistanceX = 75.2 + 2 * holeRadius

plateHoleDistanceY1 = plateWidth / 2 + holeDistanceY / 2
plateHoleDistanceY2 = plateWidth / 2 - (holeDistanceY / 2)
plateHoleDistanceX1 = plateLength - 21 - 0
plateHoleDistanceX2 = plateLength - 21 - holeDistanceX

angle = 110deg

// Model the base extrusion of the part
baseSketch = startSketchOn(YZ)
bodyProfile = startProfile(baseSketch, at = [-plateLengthBase, 0])
  |> xLine(length = plateLengthBase)
  |> angledLine(angle = angle, length = plateLength, tag = $seg01)
  |> angledLine(angle = angle + 90deg, length = width, tag = $seg02)
  |> angledLine(angle = angle + 90deg + 90deg, endAbsoluteY = width, tag = $seg03)
  |> angledLine(angle = 180deg, endAbsoluteX = -plateLengthBase, tag = $seg04)
  |> line(endAbsolute = [-plateLengthBase, 0], tag = $seg05)

// Model a supporting gusset on the interior
gussetProfile = startProfile(baseSketch, at = segEnd(seg03))
  |> xLine(length = -15)
  |> angledLineThatIntersects(angle = 90deg, intersectTag = seg03)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

// Extrude the body of the mount to desired width
body = extrude(
  bodyProfile,
  length = plateWidth,
  tagStart = $capStart001,
  tagEnd = $capEnd001,
)

// Extrude the gusset to desired thickness
gusset = extrude(gussetProfile, length = 2)

// Model the mounting holes
sketch003 = startSketchOn(body, face = seg01)

// Identify hole positions
holeCenters = [
  [
    plateHoleDistanceX1,
    plateHoleDistanceY1
  ],
  [
    plateHoleDistanceX1,
    plateHoleDistanceY2
  ],
  [
    plateHoleDistanceX2,
    plateHoleDistanceY1
  ],
  [
    plateHoleDistanceX2,
    plateHoleDistanceY2
  ]
]

// Place a hole at each position
holes = map(
  holeCenters,
  f = fn(@pt) {
    return circle(sketch003, center = pt, radius = holeRadius)
  },
)

// Extrude all holes, then subtract
holeExtrusions = extrude(holes, length = -10, method = NEW)
subtract = subtract(body, tools = holeExtrusions)

// Fillet the exterior edges
fillet(
  subtract,
  tags = [
    getCommonEdge(faces = [seg02, capStart001]),
    getCommonEdge(faces = [seg02, capEnd001]),
    getCommonEdge(faces = [seg05, capStart001]),
    getCommonEdge(faces = [seg05, capEnd001])
  ],
  radius = 5,
)


Field monitor stand

Zookeeper

Zookeeper: The Conversational CAD Agent For Parametric Modeling

Automation

Automating Your Workflow

File Formats

A Practical Overview of CAD File Formats

KCL: A Programming Language for Parametric CAD

Geometry Engine

Zoo CAD Engine Overview